The Smith Labor Saver® 0615 is a contractor friendly off-the-floor urinal support system for blowout and washout urinals. This support system includes a bottom bearing plate.

It is designed to speed up the installation process by using a one-piece, pre-assembled rigid steel frame construction.

The innovative design allows for installation in narrow walls or metal stud configurations.

Easier to Adjust: Needs front adjustment only after the wall is in place.

Meets or exceeds the applicable requirement of ASME A112.6.1 M 1997

IAPMO Listed

Dimensions shown in parentheses are in millimeters.

* This dimension can be increased when fixture support is to be installed behind a wall (specify when required and wall thickness).

** This dimension can be increased when required (specify wall thickness).

 The rough-in dimensions listed in the above drawing are based on current information shared with Jay R. Smith by the fixture manufacturer. It is recommended that you verify these dimensions with the fixture manufacturer. Jay R. Smith will not accept responsibility for rough-in dimension changes by the fixture manufacturer.